Skip to content

A Stiffness Coefficient Dialog

A Stiffness Coefficients Dialog Box

The selected vehicle's stiffness coefficients are normally used for damage-based calculation methods. Choosing A Stiffness displays a dialog showing the current A-stiffness values for each crush zone. These coefficients are initially assigned by the Vehicle Editor when the vehicle is created and may be replaced by user-entered values for each crush zone. Each value may be set either with its slider or by typing directly into the edit field.

Zone 1 - 9

Enter the A-stiffness coefficient for the zone. Only the zones defined in the current damage profile are enabled; the remaining zone fields are disabled.

All Same As Zone 1

Assigns the A-stiffness coefficient of the first zone to all the zones.

Source topic: AStiffDlg.htm — updated from source code (HVEINV-64, Physics) 2026-07-05.

← Previous: Vehicles | Index | Next: Body Torsion Dialog →