Skip to content

Event Setup Menu

The Event Set-up menu contains the following menu items. (Items appear enabled or disabled according to the capabilities of the current event's calculation method.)

Position / Velocity Command (Ctrl+P) Displays the Position/Velocity Dialog Box.

Driver Controls Command (Ctrl+D) Displays the Driver Controls Dialog Box.

Damage Profiles Command (Ctrl+M) Displays the Damage Profiles dialog, used to display and edit the crush damage profile (damage dimensions and location) for the selected vehicle in the current event.

Collision Pulse Command (Ctrl+U) Displays the Collision Pulse Dialog Box.

Vehicle Mesh Command Displays the Vehicle Mesh dialog, used to display and edit the body mesh options (e.g., mesh subdivision) used by DyMESH-based collision simulations for the selected vehicle.

Payload Command Displays the Payload Dialog Box.

Wheels Command (Ctrl+W) Displays the Wheels Properties Dialog Box.

Accelerometers Command Displays the Accelerometers Dialog Box.

Contacts Command (Ctrl+T) Displays the Contacts Dialog Box.

Restraints Assigns restraint system usage parameters to the selected human. This popup menu contains the following items:

  • Airbags (Ctrl+G) — Displays the Air Bag Restraints Dialog Box.
  • Belts (Ctrl+B) — Displays the Belts Restraint System Dialog Box.

Signals Command Displays the Event Signals Setup dialog, used to assign traffic signal timing for the current event.

Notes Command Displays the Event Notes dialog, used to enter free-form notes describing the current event.

Source topic: EventSetup.htm — updated from source code (HVEINV-64, Physics) 2026-07-05.

← Previous: Event Information Dialog Box | Index | Next: Inter-Vehicle Connections Dialog →