Roll Steer Properties

The Roll Steer properties for the selected wheel location are displayed and edited using this dialog when the suspension type is Solid Axle or one of the tandem types. (For independent suspensions the full Roll Steer Dialog Box with polynomial coefficients is displayed instead.)

The dialog title identifies the current axle (e.g., Roll Steer: Axle No. 2 (Solid Axle)).

This dialog contains the following item:

Roll Steer Coefficient (deg/deg)

User-editable roll steer coefficient: the ratio of wheel (axle) steer angle to body roll angle.

---

Source topic: RollSteerNewDlg.htm — updated from source code (HVEINV-64, Physics) 2026-07-05.

---

← Previous: Roll Steer Dialog | Index | Next: Spindle Axis Dialog →