Wheel Location Dialog¶

The wheel location coordinates relative to the vehicle-fixed coordinate system are displayed and edited using the Wheel Location dialog box. The dialog title identifies the current axle and side.

This dialog box contains the following parameters:

Coordinates x (in)¶

The longitudinal distance from the vehicle CG to the selected wheel (positive forward).

Coordinates y (in)¶

The lateral distance from the vehicle CG to the selected wheel (positive toward the right side).

Coordinates z (in)¶

The vertical distance from the vehicle CG to the selected wheel (positive downward). In HVE-2D (when the simplified 2D vehicle data dialogs are active) this field is read-only.

Copy To Other Side¶

Copies the current settings to the wheel on the other side of the same axle when you click OK. In HVE-2D this box is always checked and cannot be changed, so both wheels of the axle are always updated together.

Source topic: WheelLocDlg.htm — updated from source code (HVEINV-64, Physics) 2026-07-05.

← Previous: Suspension Data Dialog | Index