CG To Top¶
CG To Top Dialog Box
The vehicle's exterior dimensions are defined by its overall length, width and height. The user may choose to edit these dimensions using the Vehicle Dimensions dialogs; the CG to Top dialog box is one among them.
z Coord¶
Vehicle-fixed distance from the CG to the top of the vehicle.
Overall Height¶
This value is read-only; it is calculated and displayed by the dialog from the entered CG-to-top distance and the CG height.
Stiffness...¶
Displays the stiffness dialog for the top surface. In 3-D mode this is the Vehicle Exterior Stiffness dialog; otherwise it is the Stiffness Coefficients Dialog Box (A, B and Kv). This button is disabled for Fixed Barrier and Movable Barrier vehicle types.
Apply¶
Applies the entered dimension to the vehicle without closing the dialog. OK applies the value and closes the dialog; Cancel reverts the vehicle to its original dimensions and stiffness.
Source topic: CGsToAll2.htm — updated from source code (HVEINV-64, Physics) 2026-07-05.
← Previous: CG To Back | Index | Next: CG To Left →