Chapter 8 — Index¶
The original printed manual concluded with an alphabetical index keyed to page numbers. Page-number references do not apply to this Markdown edition, which is full-text searchable; the index is therefore replaced by the following topic-to-chapter guide.
| Topic | Where to look |
|---|---|
| Accident History report | Ch. 3 — Alpha-Numeric Reports; Ch. 5 — Viewing Results |
| ALAMB (Vector Force Tolerance / Max Pressure Error) | Ch. 2 — Calculation Options; Ch. 4 — Collision Phase; Ch. 6 — Messages; Calc Options reference |
| Assumptions (rollover, tire forces, homogeneous exterior) | Ch. 4 — Assumptions |
| Barrier and pole collisions | Ch. 2 — Barrier Collisions |
| Brake data / Brake table | Ch. 2 — Driver Controls; Ch. 5 — Creating Events |
| Calculation method (equations of motion, collision and trajectory phases) | Ch. 4 |
| Calculation Options (DELPSI, DELRHO, ALAMB, AMU, ZETAV, C0/C1/C2) | Ch. 2 — Calculation Options; Calc Options reference |
| CDC (Collision Deformation Classification) | Ch. 1; Ch. 3 — Damage Data; Ch. 6 — Messages |
| Damage Data report / Damage Profiles | Ch. 3; Ch. 5 |
| Delta-V, PDOF | Ch. 1 — Overview; Ch. 3 — Damage Data |
| Driver controls (steer, brake, throttle tables) | Ch. 2 — Driver Controls |
| Environment (visual and physical data, gravity, surface geometry) | Ch. 2 — Environment |
| Event creation, set-up and execution | Ch. 2 — Event; Ch. 5 — Creating Events |
| Fiala tire model, tire friction, cornering stiffness | Ch. 2 — Unsprung Mass; Ch. 4 — Trajectory Phase |
| GetSurfaceInfo (terrain search options) | Ch. 2 — Get Surface Information; Calc Options reference |
| Inertias, Move CG, weight | Ch. 2 — Sprung Mass |
| Messages (fatal, diagnostic, informative) | Ch. 6 |
| Program Data report | Ch. 3; Ch. 5 |
| Restitution model | Ch. 4 — Collision Phase; Calc Options reference |
| RHO vectors (collision vectors) | Ch. 3 — Damage Data; Ch. 4 — Collision Phase |
| Simulation Controls (timesteps, output interval, termination) | Ch. 2 — Simulation Controls |
| Stiffness coefficients (Kv) | Ch. 2 — Exterior; Ch. 4 — Collision Phase; Ch. 5 — Editing the Vehicles |
| Trajectory Simulation / Playback | Ch. 3 — Trajectory Simulation; Ch. 5 — Viewing Results |
| Tutorial (Visibility Study) | Ch. 5 |
| Variable Output table and variable selection | Ch. 3 — Variable Output Table; Ch. 5 — Variable Output |
| Vehicle data and parameters | Ch. 2 — Vehicles; Ch. 3 — Vehicle Data |
Previous: Chapter 7 — Technical References | Back to Contents
← Previous: Chapter 7 — Technical References | Index