Skip to content

Chapter 7 — References

  1. Day, T.D., "Differences Between EDHIS and HSRI-3D," SAE Paper published at the 1997 SAE International Congress, Detroit MI.
  2. Robbins, D.H., Bennett, R.O., Roberts, V.L., "HSRI Three-Dimensional Crash Victim Simulator: Analysis, Verification and User's Manual, and Pictorial Section," HSRI Report No. BIO M-70-9, HSRI, University of Michigan, 1971.
  3. Bennett, R.O., Bowman, B.M., Robbins, D.H., "Supplement to the HSRI Three-Dimensional Crash Victim Simulation Report," HSRI Report No. UM-HSRI-77-20, University of Michigan, 1977.
  4. Human Tolerance to Impact Conditions as Related to Motor Vehicle Design, SAE Technical Report No. J885, Society of Automotive Engineers, Warrendale, PA, 1986.
  5. EDSMAC User's Manual, Second Edition, Engineering Dynamics Corp., Beaverton, Oregon, October, 1997.
  6. HVE User's Manual, Second Edition, Engineering Dynamics Corp., Beaverton, Oregon, October, 1997.

Previous: Chapter 6 — Messages | Back to Contents

← Previous: Chapter 6 — Messages | Index